T3000 OperationStep1.Visit 107.170.34.189/ftp/software/9TstatSoftware.zip, download T3000 software and install it;
Step2.Plug Tstat8 in power,connect Tstat8 to PC via RS485 or Ethernet;
Step3.Start T3000 software,click
![]() ![]() ![]() 4. Click Tstat8 log, then click
![]() ![]() 5.Click
![]() ![]() 6.Click
![]() ![]() ![]() 7.Click the schedule icon
![]() Each day we support 6 events, and you can select the mode for each event:
For home mode, unit will use day setpoint to control the outputs;
For work mode, it will use night setpoint to control the outputs;
For sleep mode, it will use sleep setpoint to control the outputs
![]() For example as below:
when time is between 6:00 to 9:00, unit will work on home mode;
when time is between 9:00 to 18:00, unit will work on work mode;
when time is between 18:00 to 22:00, unit will work on home mode;
when time is between 22:00 to Tuesday 6:00, unit will work on sleep mode
![]() After you setup the Monday schedule, you can copy the Monday setting from Tuesday to Friday,
then you can use the “Copy To Monday-Friday” function to copy the setting.
![]() ![]() If you need different setting for each day, you can use insert function to edit your schedule, for
example, on Saturday, double click the window and it will show a small dialog to insert new event
and you can set up the time.
![]() ![]() So on Saturday, when time is between 8:30 to 12:30, unit will work on home mode;when time
is between 12:30 to 20:30, unit will work on work mode; when time is between 20:00 to 22:30,
unit will work on home mode;when time is between 22:30 to Sunday 6:00, unit will work on sleep
mode.
Note: Select “Enable” option to enable schedule function.After edit schedule, make sure click the
save button to save the setting !
|