rev32
1. support ptransfer_to_modbus
2. for pulse counter, support 10HZ, last rev only support 1 Hz
3. change jumper to 0-10v when range is pulse counter
4. fixed LED issue, AI12 TO AI22, range is thermsitor, led status is wrong


rev31
1. fix watchdog for all products
2. add output relinguish

rev29
1. when there are ip conflict in subnet, T3000 will send out command to change conflict ip

rev28
1. for a udp connection, do not response broadcast packet unless they are not in same subnet.


rev27:
1. use bacnet_Rev12.lib, add feature which support change vendor id.
rev26: 
1. (only for T3-22i)fix IN4 high speed count issue, caused by speeding up reading inputs. 
2. (only for T3-22i)fix led status when inputs are high speed count.
REV25£ºfix bacnet object number, only for t3-pt112  
REV24: speed up reading inputs
REV23£ºadd new bacnetlib
REV22: fix custom tables and input type

REV19£ºadd a av the make the module switch the bacnet to modbus.  fix the bug when you  change baud to 115200 ,it back to 57600 .
REV18: change the bacnet number from basing 0 to  basing 1 .
REV17: make the bacnet  mac address ,  port  can be changed . 
REV16: change the sendbuf length¡£
rev15  set the range , we will set the digit and analog auto .
rev14: fix pulse count for T3-22AI. AND FIX  the comunication problem.
rev13:change the display of pulse counting and fix the ethernet comunication problem when add new baudrate. the ram is ran out and it casue the problem when add the new baudrate.
rev12:add the baudrate 76800
rev11: change the bacnet lib to send out the float type data.
rev10:update the baclib and set the range automatic.
rev9: change the ENC28j60.c and spi.c
rev8: store the data into flash
rev7: add the data formate as minipanel has and detele some unuseful data.
rev6: add the mstp and bacnet ip lib
rev5: fix the data length  error
rev4: fix the buf of isp do not jump to the app code.
rev3: add the analog pulse counting.
rev2: add the tcpip protocol and the Ethernet port modbus is ok.
rev1: add the mstp for the t3 modules.
rev0: finish the function for the t3-6ao and t3-22in to take place of the old t3 modules.