English 
Chinese 
RS485 + wifi
AirLab, the All-in-one Indoor Air Quality Laboratory
The “Air Lab” all-in-one sensor is a total solution for measuring the indoor air quality and environment. The sensor is used widely in schools, hospitals and office buildings for demand ventilation and general air quality measurement.
There are many sensor elements in the “Air Lab” but the main attraction is the air particle sensor which can measure both the number of air particles and their density in several bin sizes. Supporting sensors include a C02 sensor, temperature, humidity, occupancy sensor, and TVOC sensor…. pretty much all the parameters you could ask for. The AirLab gives you confidence your building occupants are comfortable and breathing clean air.
The sensor integrates well with existing building automation systems or can operate stand alone as a general air quality monitor. Wireless communications over Wifi is supported using Bacnet IP or Modbus TCP protocols. The sensor also supports wired communications over RS485 twisted pair using BACnet MSTP or Modbus RTU protocols.
Humidity and Temp Transmitters
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
Tstat10 Fully Programmable Thermostat
This full-featured thermostat is designed for cooling and heating systems in residential and commercial buildings. The thermostat can be programmed for use with air handlers, fan coils,VAV, modulating valves and practically any HVAC application. All models support bacnet and modbus …
Tstat8 Bacnet Thermostat
This full-featured thermostat is designed for cooling and heating systems in residential and commercial buildings.
CO2 Sensor
The CO2 sensor with Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor C02, temperature and humidity monitoring. The modbus interface provides easy setup and integration into large systems.Supports Modbus RTU over both the Ethernet port and the RS485 port,supports Bacnet over both the Ethernet port (IP) and the RS485 port (MSTP).