Sensors

The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.

The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.

This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a  retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.

This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.

FM15-25 Series Rotatory Wing Dry Transmitting Water Flow Meters are used for measuring the volume of cold/hot potable water passing through the pipeline and remotely transmitting the signal of the water volume to remote monitoring equipment

Water Flow Switch, Stainless Steel Paddles, brass fittings, SPDT switch, liquid, water, ethylene glycol solutions.

This water and liquid level transmitter measures fluid level in tanks and wells and sends out a 0-10V signal proportional to the liquid depth. Stainless steel construction makes this sensor compatible with most any fluid.

The sensor is temperature compensated and operates accurately over all ambient temperatures.

The sensor head has a baffle to prevent debris buildup making it suitable where there is sludge and other solids mixed with the liquid. The polyurethane cable ensures long-term durability, while the stainless steel body protects against rust.  Several models are available for tank depths from one to ten meters.

Wall Mount Transducer , Bacnet/Modbus over RS485,0-10v 4-20ma output signal

These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.

Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal