Chinese 
English 
店
1K PT Temperature Sensors
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
三点浮动式阻尼执行器
这种3点浮动式阻尼执行器采用无刷直流电机，智能设计，IP等级高，广泛用于HVAC系统的阻尼控制。
Air Lab & PM2.5 Particle Sensor
These air lab & PM2.5 particle sensor can be used for indoor air temperature and humidity monitoring in various industrial plant, clean room, lab, machine room, commercial buildings, airport, and schools. The modbus interface is documented and integrator friendly. They also have transducer outputs for connecting as analog inputs to all popular control systems. BACnet MS/TP and Modbus RTU protocols over RS485,with an ethernet port.
空气质量，嗡嗡声和温度
The Node style sensor is a small form factor sensor designed for environment monitoring and control in commercial and institutional buildings. The product supports both Modbus and Bacnet on the RS485port for direct digital readings over the network on all models. Also has transducer outputs configurable as either 0-10V or 4-20ma signals.
AO2DO继电器模块转换器
The AO2DO relay module converts the analog outputs of the T3 controller series into a binary dry contact output. The relay contacts are intended for pilot duty only and are rated at 0.5A/125VAC max. The module comes in 3 gang …
Bacnet Room Setpoint＆Temp Display
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
Boiler stack temperature sensor and thermowell, 1k Pt
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
Electro-thermal Actuator
The SRT06XU Electro-thermal Actuator is designed to control the flow of a hot water pipe to control indoor temperature.
Outdoor Weather Station
Outdoor weather station with humidity, temperature and light level sensors helps with free cooling strategies and other energy saving routines. The sensor communicates over both Ethernet and RS485, using BOTH Bacnet and Modbus protocols so there are many ways to integrate into the system.
PM2.5 / 10粒子计数器
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.