Chinese 
English 
控制器
T3系列BACnet可编程控制器
The T3 series Bacnet programmable controller is a low cost performer with big system features. There are three versions with various I/O configurations and can be expanded with external i/o modules to form a complete building automation solution.
Wireless Modbus USB Converter
The Zigbee Dongle is a lowcost, low consumption, and wireless mesh network targeted at wide development of long life devices in wireless control and monitoring applications.
Bacnet and modbus I/O modules
The T3 general purpose modules add input/output expansion space for building automation systems. Integrators regularly tell us they are winning more projects because of the excellent price point and features of these devices.
Precision Pt Temperature Sensor Module
The T3-PT12 is a precision temperature measurement module which can accept up to twelve instrument grade sensors.
Fully Programmable Bacnet Boiler Room Controller
The CM5 Boiler Room Controller is a fully programmable Bacnet controller for radiant heating and more.
GK-7000-Linux – Touch Screen PC
GK-7000 is a high performance embedded industrial computer with a capacitive touch screen user interface. The CPU is the Samsung S3C2440 which is based on an Arm9 core. It’s Linux 2.6.32 operating system. This computer offers a full list of technical specs at low power consumption and high reliability.
USB转RS485转换器
The USB to RS485 Converter is suited for transmitting smaller blocks of data over long distances with many nodes sharing the two wire bus.
Zigbee to RS485 Repeater, 3 Input Module
Zigbee repeater is a kind of low cost, low consumption, and wireless mesh network targeted at wide development of long life devices in wireless control and monitoring applications.
OR 485 Isolated Converter/Repeater
The OR-485 is an externally powered isolated converter/repeater with diagnostic LEDs.There are two input ports which can be designated, via jumper, as either RS232( for connection to a PC as a converter), or RS485 (for bus repeater mode). The isolated, half-duplex RS485 output port has two separate connectors to make dividing the network simple for troubleshooting. The diagnostic LEDs show common wiring mistakes such as short or open circuits. All protocols (Bacnet, Modbus, generic RS485 protocols, etc.) are supported. Some of the diagnostics, such as “bad CRC” and “Modbus” error reporting, however, are available only with Modbus at 19.2k or 9600 baud.
Digital Storage Oscilloscope
Digital Storage Oscilloscope is a 5-trace 4-channel digital oscilloscope for common electronic engineering tasks, 4 channels, 2 analog channels, 2 digital channels.
PWM Input to Voltage Output Transducer
The PWM-1 is a signal converter which takes a pulsed binary input signal and outputs a voltage signal proportional to the duration of the pulse.
T3 Series Modbus I/O Modules
The T3 Series Modules are general purpose input/output modules for building integrators. Available in several input/output configurations, the T3 Series Module provides convenient termination for field devices and interfacing to HVAC, lighting, temperature sensors, and other typical building automation applications. Each of the Universal inputs can be configured, via jumper, for either 0-5V or 0-20mA signals. The outputs are available in dry contacts 1amp/output, 0-10V analog, and PNP sinking. The modules are slave devices that can be easily controlled via the RS485 serial interface using the industry standard Modbus RTU Protocol.