Non-contact fluid level sensor detects fluids within non metallic containers from outside the container without direct contact to the fluids. Idealy suited for lead acid batteries, fuel tanks, water storage tanks and any application where contact with the fluid or penetrations in the tank are not allowed.The sensors work on an inductance principle so they work fine with opaque material such as dark plastic, anything non metallic
This water and liquid level transmitter measures fluid level in tanks and wells and sends out a 0-10V signal proportional to the liquid depth. Stainless steel construction makes this sensor compatible with most any fluid.
The sensor is temperature compensated and operates accurately over all ambient temperatures.
The sensor head has a baffle to prevent debris buildup making it suitable where there is sludge and other solids mixed with the liquid. The polyurethane cable ensures long-term durability, while the stainless steel body protects against rust. Several models are available for tank depths from one to ten meters.
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.
This is a highly durable and stable stable humidity and temperature sensor mouned in a waterproof connector housing. This can be used in applications such as agricultural and extreme outdoor environments.
ME237 three-phase multi-functional panel meter supports external 333mV CTs (ME237V),supports 3PH3W and 3PH4W system.
Duct Mount Air Lab Sensor with humidity,temperature,CO2,TVOC,PM2.5 and light level sensors
Actuator for 1/2″~1″, DN15~DN25 ball valve; operation time: about 45s(50Hz, 90 º), 24Vac
The ME337 Three-phase power meter with Rogowski coils makes for easy retrofit installation on both three and four wire systems. Supports Modbus RTU protocol over RS485 for integeration into building management systems.
Temperature and Humidity Trasnsmitter with Bacnet/Modbus over RS485,
Optional 0-10v / 4-20ma output signal.
Humidity/Temp Sensor is overmolded into a pluggable, waterproof connector
The Current sensor,output 0-330mv,Current Frequency 45Hz-65Hz
English 
Chinese 