The MY2N Relay is a general purpose plug in relay with a LED for power switching applications,built-in diode and surge suppression, test push buttons and more.MY2 = 2-Pole; MY4 = 4-Pole; N = LED; Z = Bifurcated; I = Push-to-Test.
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.
The product is AC to DC switching power transfer device,of which the black pluggable connector fits onto most Temco products, or can be taken off to connect to your own devices.
The Pressure Monitor is used to measure differential pressure in the range of +/-1″ wc full scale, +/-8″ wc, 0 ~100 PSI,0~250 PSI.It combines precision, high sensitivity silicon sensing capabilities and the latest ASIC technology to substantially reduce offset errors due to changes in temperature, stability to warm up, long term instability and position sensitivity. BACnet MS/TP and Modbus RTU protocols over RS485,with an ethernet port.
Single Ended Pressure Transmitter is a kind of standard and most popular transmitter applied in air and liquid pressure measuring,since a high sensitivity silicon pressure chip is employed in the sensor.
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
The relay board is designed mainly for isolation between thermostat and a fan coil or air handler, 3 relays @ 12A/125VAC, 6A/250VAC, 2 @110V 1A.
The VG Series Valves are designed for hot water, chilled water, or steam control in HVAC systems. The globe design exhibits excellent controllability with two-way equal percentage and three-way linear response. The valves come in two-way or three-way NPT thread configurations. All the valves can be fitted with many different control actuators (both electric and pneumatic) and with a variety of control signals, spring ranges, and failsafe operation.
Actuator, 1000N torque, 24VAC only, with self-stroke adjustment, with 0(2)~10Vdc or 0(4)~20mA DC input control signal and 0~10Vdc feedback signal，with manual operator
RS485 Lightning Protector is used for lightning protection of data communication system.