Blog - Page 8 of 11 - Temco Controls Ltd.

Water and Liquid Level Transmitter

September 22, 2023
0 Comment(s)

This water and liquid level transmitter measures fluid level in tanks and wells and sends out a 0-10V signal proportional to the liquid depth. Stainless steel construction makes this sensor compatible with most any fluid.

The sensor is temperature compensated and operates accurately over all ambient temperatures.

The sensor head has a baffle to prevent debris buildup making it suitable where there is sludge and other solids mixed with the liquid. The polyurethane cable ensures long-term durability, while the stainless steel body protects against rust. Several models are available for tank depths from one to ten meters.

Wall Mount Transducer

September 27, 2022
0 Comment(s)

Wall Mount Transducer , Bacnet/Modbus over RS485,0-10v 4-20ma output signal

Air Quality, Hum & Temp

March 6, 2018
0 Comment(s)

The Node style sensor is a small form factor sensor designed for environment monitoring and control in commercial and institutional buildings. The product supports both Modbus and Bacnet on the RS485port for direct digital readings over the network on all models. Also has transducer outputs configurable as either 0-10V or 4-20ma signals.

Ball Valve Actuator

April 7, 2022
0 Comment(s)

Actuator for 1/2″~1″, DN15~DN25 ball valve; operation time: about 45s(50Hz, 90 º), 24Vac

Pressure Transmitter

May 17, 2016
0 Comment(s)

Single Ended Pressure Transmitter is a kind of standard and most popular transmitter applied in air and liquid pressure measuring,since a high sensitivity silicon pressure chip is employed in the sensor.

Bacnet Room Setpoint & Temp Display

March 25, 2021
0 Comment(s)

Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.

Single Phase Power Meter with CT

September 18, 2017
0 Comment(s)

The Single Phase Power Meter with internal CT are solid state transducers for measuring the current and voltage of fans, pumps, and other HVAC equipment.The current sensors are available in two types for either AC @ 200A or DC @ 100A applications.The connections are by Modbus.