Precision Pt Temperature Sensor Module
- October 20, 2025
- 0 Comment(s)
The T3E-PT12 is a precision temperature measurement module which can accept up to twelveinstrument grade sensors.
The T3E-PT12 is a precision temperature measurement module which can accept up to twelveinstrument grade sensors.
This full featured thermostat is designed for line voltage cooling and heating systems in residential and commercial buidings. The thermostat can be configured for or use with air handlers, fan cols, VAv, modulating valves and practically any HVAC application.All models …
The new ESP32-POE board is a Wi-Fi-enabled development board based on the ESP32
This Tstat10E Fully Programmable Thermostat is designed for cooling and heating systems in residential and commercial buildings. You can program the thermostat to control air handlers, fan coils, VAV, modulating valves, and nearly any HVAC application. All models support bacnet …
This product has widely been used for measurement of differential pressure of pipeline fluids in petroleum industry, chemical industry, electric power hydrology etc
The water flow sensor is mainly composed of a plastic valve body, a water flow rotor assembly and a Hall sensor, which is installed in the water inlet end of the water heater for detecting the water flow, when the …
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
Non-contact fluid level sensor detects fluids within non metallic containers from outside the container without direct contact to the fluids. Idealy suited for lead acid batteries, fuel tanks, water storage tanks and any application where contact with the fluid or penetrations in the tank are not allowed.The sensors work on an inductance principle so they work fine with opaque material such as dark plastic, anything non metallic
This water and liquid level transmitter measures fluid level in tanks and wells and sends out a 0-10V signal proportional to the liquid depth. Stainless steel construction makes this sensor compatible with most any fluid.
The sensor is temperature compensated and operates accurately over all ambient temperatures.
The sensor head has a baffle to prevent debris buildup making it suitable where there is sludge and other solids mixed with the liquid. The polyurethane cable ensures long-term durability, while the stainless steel body protects against rust. Several models are available for tank depths from one to ten meters.
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.