USD
USD
CAD
CNY
EUR
AUD
GBP
NZD
Login/Register

Cart

Products
More Categories
MENU

Home/Blog

WTS Series Water Temperature Sensor

  • May 17, 2016
  • 0 Comment(s)

This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.

Outdoor Air Temperature Sensor, Overmolded

  • May 17, 2016
  • 0 Comment(s)

The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.

Occupancy Sensor

  • May 17, 2016
  • 0 Comment(s)

This passive infrared detector, with high stability, has adopted advanced technology in signal processing and provides extremely high detection ability and anti-error alarm. The detector will detect movement of human automatically when intruder passes through the detection area, and it will send out alarm signal to alarm host if there is movement.This product is suitable for the safety of residential houses, villas, factories, markets, warehouses, and office buildings.

Thermowells

  • May 17, 2016
  • 0 Comment(s)

These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.

A lit up non contact fluid level sensor strapped to a jar, determining that the fluid level within has reached the required height.

Non-contact liquid level sensor

  • April 25, 2024
  • 0 Comment(s)

Non-contact fluid level sensor detects fluids within non metallic containers from outside the container without direct contact to the fluids. Idealy suited for lead acid batteries, fuel tanks, water storage tanks and any application where contact with the fluid or penetrations in the tank are not allowed.The sensors work on an inductance principle so they work fine with opaque material such as dark plastic, anything non metallic

High temperature probe for Floor Heating & Solar applications

  • May 17, 2016
  • 0 Comment(s)

This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors  and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.

Duct Temperature Sensor

  • May 17, 2016
  • 0 Comment(s)

The duct sensor is used to measure the supply and return air temperature in HVAC system. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. There is a precision thermistor. The probes are epoxy sealed to prevent moisture from migrating into the probe. Field calibration is not generally required. The standard probe length is 12 inch. Custom probe lengths, wire types and sensor elements are available for large OEM projects. Ask about our plastics & metal manufacturing capabilities for custom housings as well.

WTS5: Strap-on Water Temperature Sensor

  • May 17, 2016
  • 0 Comment(s)

This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a  retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.

Outdoor Air Temperature Sensor

  • May 17, 2016
  • 0 Comment(s)

This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.