Sensors
Occupancy Light Switch
The RZ021-10A-G(No Neutral Required) is an US style 5A wall mounted occupancy sensor switch which uses advanced passive infrared sensor(PIR) and MCU control.
Outdoor Air Lab
Outdoor Air Lab Sensor with humidity,temperature,CO2,TVOC,WIFI and light level sensors
Outdoor Weather Station
Outdoor weather station with humidity, temperature and
light level sensors helps with free cooling strategies and
other energy saving routines.The sensor communicates
over both Ethernet and RS485, using BOTH Bacnet and
Modbus protocols so there are many ways to integrate into
the system.
PM2.5/10 Particle Counter
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.
Split Core Current Sensor with 5VDC output
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.
Tank Level Sensor
SUS 316 Stainless stell ,Standard SAE 5 hole pattern ,Output signal:0-10k ohm.
Temperature and Humidity Transducer With Bacnet and Modbus
Temperature and Humidity Trasnsmitter with Bacnet/Modbus over RS485,0-10v 4-20ma output signals. Sensor is overmolded into a pluggable, waterproof connector
Temperature Transducer with Bacnet and Modbus RS485
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
Wall Mount Transducer
Wall Mount Transducer , Bacnet/Modbus over RS485,0-10v 4-20ma output signal
Water and Liquid Level Transmitter
This water and liquid level transmitter measures fluid level in tanks and wells and sends out a 0-10V signal proportional to the liquid depth. Stainless steel construction makes this sensor compatible with most any fluid.
The sensor is temperature compensated and operates accurately over all ambient temperatures.
The sensor head has a baffle to prevent debris buildup making it suitable where there is sludge and other solids mixed with the liquid. The polyurethane cable ensures long-term durability, while the stainless steel body protects against rust. Several models are available for tank depths from one to ten meters.
Water Flow Switch
Water Flow Switch, Stainless Steel Paddles, brass fittings, SPDT switch, liquid, water, ethylene glycol solutions.
CO2 Sensor
The CO2 sensor with Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor C02, temperature and humidity monitoring. The modbus interface provides easy setup and integration into large systems.Supports Modbus RTU over both the Ethernet port and the RS485 port,supports Bacnet over both the Ethernet port (IP) and the RS485 port (MSTP).
Air Flow Switch
The air flow switch is used to prove air flow in ducts. It has an adjustable trip point with a range from 200 to 1800 FPM (1 to 9.2 m/sec).
The SPDT contacts are rated8A@250VAC.
Occupancy Sensor
This passive infrared detector, with high stability, has adopted advanced technology in signal processing and provides extremely high detection ability and anti-error alarm. The detector will detect movement of human automatically when intruder passes through the detection area, and it will send out alarm signal to alarm host if there is movement.This product is suitable for the safety of residential houses, villas, factories, markets, warehouses, and office buildings.
Pressure Transmitter
Single Ended Pressure Transmitter is a kind of standard and most popular transmitter applied in air and liquid pressure measuring,since a high sensitivity silicon pressure chip is employed in the sensor.