Dual Float Switch
- November 25, 2016
- 0 Comment(s)
The float switch is a device used to sense the level of water within a tank,and it can actuate a pump,an indicator, an alarm, or other device.
The float switch is a device used to sense the level of water within a tank,and it can actuate a pump,an indicator, an alarm, or other device.
The air flow switch is used to prove air flow in ducts. It has an adjustable trip point with a range from 200 to 1800 FPM (1 to 9.2 m/sec).
The SPDT contacts are rated8A@250VAC.
Single Ended Pressure Transmitter is a kind of standard and most popular transmitter applied in air and liquid pressure measuring,since a high sensitivity silicon pressure chip is employed in the sensor.
The product is AC to DC switching power transfer device,of which the black pluggable connector fits onto most Temco products, or can be taken off to connect to your own devices.
The CS series Current Sensors are solid state transducers for measuring the current in fans, pumps and other HVAC equipments.
Terminal shorting bar,10 pin.Use these strips to run a common conductor through multiple terminals on any of the Temco T3 series controllers and I/O modules. The outer bar is covered in high temperature ABS. They’re available in 10 pin only version for now, you can cut them down for shorter runs or gang them up for longer runs.
Definite purpose contactor is a robust and low cost switching device specifically designed for the heating,ventilating and air conditioning industry.
The relay board is designed mainly for isolation between thermostat and a fan coil or air handler, 3 relays @ 12A/125VAC, 6A/250VAC, 2 @110V 1A.
DS100 handheld digital oscilloscope is a dual-channel mini portable signal generator
This full-featured thermostat is designed for cooling and heating systems in residential and commercial buildings.
Attention: The Tstat8 is our legacy product, for new projects please consider the Tstat10https://bravocontrols.com/shop/tstat10-bacnet-thermostat/