Blog - Page 9 of 11 - Temco Controls Ltd.

Humidity Sensor Module

May 17, 2016
0 Comment(s)

Humidity Sensor Modules are designed for monitoring the temperature and humidity in commercial buildings, agricultural applications and light industrial processes. The calibration data is stored in the module itself making it possible to field swap the sensor module without re-calibrating. The pluggable threaded fitting means sensors can be swapped out without disconnecting wires or fittings, simply unscrew the fitting and screw in a replacement sensor.

Plastic Enclosures

May 17, 2016
0 Comment(s)

The plastic enclosures covers many different applications, for example,Tstst6,HUM,DTS,T3 series,etc.Choose the enclosure whose design, size and configuration best meets your particular requirements. With all conceivable technologies available in-house, we can finish and process the plastic enclosures and adapt them to your requirements.

Welcome to contact us!

RTS3 Flush Mount Hidden Room Temp

May 17, 2016
0 Comment(s)

The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.

Differential Air Pressure Switch

May 17, 2016
0 Comment(s)

PSN40-400A differential pressure switch is used for fan status and dirty filter applications. A knob with pressure values on it allows the setpoint to be adjusted visually in the field. The plastic duct probe tubes, flexible silicon tubing and the mounting screws are included with all models.

Probe Temperature Sensor

May 17, 2016
0 Comment(s)

This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.

Tamper Proof room temperature sensor

May 17, 2016
0 Comment(s)

The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.

RTS Wall and Bead Sensors

May 17, 2016
0 Comment(s)

The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.

Omron G2R Relay

May 17, 2016
0 Comment(s)

Omron General-Purpose Relay available in SPDT and DPDT with either AC or DC coils. It comes with a pluggable base for easy din rail mounting and fast swapping of relays in the field. The narrow width allows for high density i/o in controls cabinets. The LED indicator on the low voltage coil provides handy indication of the relay status.All of the prices below are for the relay with LED option and the din rail base included.

Pressure Sensor

May 17, 2016
0 Comment(s)

The Pressure Monitor is used to measure differential pressure in the range of +/-1″ wc full scale, +/-8″ wc, 0 ~100 PSI,0~250 PSI.It combines precision, high sensitivity silicon sensing capabilities and the latest ASIC technology to substantially reduce offset errors due to changes in temperature, stability to warm up, long term instability and position sensitivity. BACnet MS/TP and Modbus RTU protocols over RS485,with an ethernet port.

Mechanical Relay with LED and base

May 17, 2016
0 Comment(s)

The MR Mechanical Relay is a general purpose relay suitable for both low voltage and power switching. It features a low power coil, the 12VDC version requires only 100ma to energize. The DPDT relay is rated at 10A, 120VAC. Each relay has an LED showing the low voltage status.

Cart