Occupancy Light Switch
- June 3, 2021
- 0 Comment(s)
The RZ021-10A-G(No Neutral Required) is an US style 5A wall mounted occupancy sensor switch which uses advanced passive infrared sensor(PIR) and MCU control.
Non-contact liquid level sensor
- April 25, 2024
- 0 Comment(s)
Non-contact fluid level sensor detects fluids within non metallic containers from outside the container without direct contact to the fluids. Idealy suited for lead acid batteries, fuel tanks, water storage tanks and any application where contact with the fluid or penetrations in the tank are not allowed.The sensors work on an inductance principle so they work fine with opaque material such as dark plastic, anything non metallic
Momentary Push Button
- May 17, 2016
- 0 Comment(s)
HPB5 series are suitable to industrial control circuit with AC 50Hz or 60HZ, 0~380V rated voltage and 0~220V D C operating voltage,used for the control of magnetic starter, contactor, relay and other electric circuit.
Mechanical Relay with LED and base
- May 17, 2016
- 0 Comment(s)
The MR Mechanical Relay is a general purpose relay suitable for both low voltage and power switching. It features a low power coil, the 12VDC version requires only 100ma to energize. The DPDT relay is rated at 10A, 120VAC. Each relay has an LED showing the low voltage status.
Mechanical Relay Board
- May 17, 2016
- 0 Comment(s)
The MRB Mechanical Relay Board is a handy way to mount multiple relays in a tidy package with either 4 or 8 relay models and field selectable coil voltage of 12VDC and 24VAC. There’s a status LED for each relay and a label with writable surface where you can mark the name of each output.
HVAC Contactors, UL : E246810
- May 17, 2016
- 0 Comment(s)
Definite purpose contactor is a robust and low cost switching device specifically designed for the heating,ventilating and air conditioning industry.
Humidity Sensor with Waterproof Connector
- July 27, 2023
- 0 Comment(s)
This is a highly durable and stable stable humidity and temperature sensor mouned in a waterproof connector housing. This can be used in applications such as agricultural and extreme outdoor environments.
Humidity Sensor Module
- May 17, 2016
- 0 Comment(s)
Humidity Sensor Modules are designed for monitoring the temperature and humidity in commercial buildings, agricultural applications and light industrial processes. The calibration data is stored in the module itself making it possible to field swap the sensor module without re-calibrating. The pluggable threaded fitting means sensors can be swapped out without disconnecting wires or fittings, simply unscrew the fitting and screw in a replacement sensor.
Humidity and Temp Transmitters With Waterproof Connector
- May 16, 2024
- 0 Comment(s)
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
Humidity and Temp Transmitters
- January 4, 2018
- 0 Comment(s)
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.